SS30RS Truck Mounted Freestall Filler


THE SS 30 FILLER WILL HOLD APPROXIMATELY 30CU/YDS OF COMPOST BEDDING. WE MOUNT ALL OF THE SS30 BOXES ON TRUCKS. THE BOXES ARE 20FT LONG AND ARE SO LARGE IT JUST WORKS BETTER. NOT TO SAY WE COULDN’T TRAILER MOUNT IT. OUR FILLER HAS A REVERSABLE FLOOR CHAIN. FORWARD IS TO FILL THE FREESTALLS. REVERSE IS USED FOR SPREADING THE SEPERATED MANURE FOR QUICK DRYING. THE OTHER HYDRAUILC VALVE CONTROLS THE CROSS FEED AND IN THE OTHER POSITION TURNS ON THE SPREADER SPINNERS. WE USE ALL HEAVY DUTY HYDRAULICS ON THIS FILLER. THE PUMP IS A HEAVY DUTY DOUBLE PUMP. PLENTY OF FLOW AND POWER. THE MOTORS TO DRIVE THE DIFFERENT FUNCTION ARE HEAVIER THAN IS NEED FOR THIS APPLICATION. PROVIDING FOR A LONG AND PRODUCTIVE LIFE. THE HOSES ARE OVERSIZED TO KEEP DOWN THE HEAT FACTOR. MOST OF THE CONTROLS ARE CAB MOUNTED. PTO CONTROL, REAR DOOR LOCK, BACKUP LIGHTS, WORK LIGHT, FLOOR SPEED. THIS UNIT HAS IT ALL.
 
WHAT CAN I SAY! YOUR SATISFACTION IS OUR GOAL.

PRINT OUT OUR TRUCK DIMENTION PRINT IF YOU ARE GETTING CLOSE. IT WILL HELP YOU DECIDE ON A TRUCK THAT WILL FIT.
PREPERATION OF A TRUCK FOR A FREESTALL FILLER TAKES SOME DOING.
IT IS BEST TO CHOSE A TRUCK WITH AN AUTOMATIC TRANSMISSION, THEN MOUNT A PTO, HOT SHIFT IS BEST, THEN REPLACED THE RADIATOR WITH A FEEDLOT CORE, THEN BYPASS THE ENGINE PRECOOLER, THEN TAKE OFF THE AC CONDENSER, THEN COVER THE OUTSIDE AIR INTAKE TO THE TRUCK HEATER/DEFROST SYSTEM, THEN MAKE SURE THE FRAME AND REAR AXELS ARE SET RIGHT, NO WE’RE NOT DONE YET. CHECK THE RATIO IN THE REAR ENDS TO MAKE SURE THEY ARE LOW AND SLOW ENOUGH TO WORK FOR YOUR CONDITIONS. NOW YOU HAVE A PRETTY GOOD START AT GETTING IT DONE RIGHT. BUT IF YOU ARE NOT EQUIPPED TO THE JOB. WE ARE MORE THAN HAPPY TO FIND A TRUCK FOR YOU AND SET IT UP, WITH YOUR APPROVAL.THINK IT ALL OUT AND PLEASE GIVE US A CALL. WE CAN GET IT DONE FOR YOU.

Click HERE to download truck dimension print
aaaaaaaaaaaaiii